« previous next »
Pages: [1]   Go Down

Author Topic: Raymarine ST60 Control Heads  (Read 2857 times)

simonmoore

  • Swab
  • Posts: 23
  • Karma: +0/-0
Raymarine ST60 Control Heads
« on: June 03 2015, 01:40 »
I shall be replacing the control heads for my Raymarine ST60 Autopilot, Wind and Tridata instruments for newer heads.  Is this a straight forward plug and play scenario or will they require lengthy calibration?
Logged

paulemeier1

  • Able Seaman
  • ****
  • Posts: 125
  • Karma: +3/-0
  • Boat Model: Bavaria 37.2 Cruiser
  • Boat Year: 2006
Re: Raymarine ST60 Control Heads
« Reply #1 on: June 03 2015, 05:53 »
I have replaced the st60 with an i70 display on a stng system. I have to install an itc-5 to use the analog "geber" with the digital display.

I have to calibrate the system, but it is no problem. a few turns left an right. a short way straight ahead for the wind system and 5 different speeds to calibrate the speed index.

all in all no problem.
Logged

Salty

  • Old Salt
  • *****
  • Posts: 1216
  • Karma: +3/-1
  • Boat Model: Bavaria 36
  • Boat Year: 2002
Re: Raymarine ST60 Control Heads
« Reply #2 on: June 03 2015, 06:06 »
You may find that the new instruments are designed to be used with Raymarines SeatalkNG communication system instead of the older Seatalk that you already have, so keep in mind that some or possibly all of the communication wiring may also need to be changed.
Logged

Moodymike

  • Old Salt
  • *****
  • Posts: 277
  • Karma: +0/-0
Re: Raymarine ST60 Control Heads
« Reply #3 on: June 03 2015, 18:23 »
You will need a converter if you still have any existing Raymarine equipment
Logged

IslandAlchemy

  • Old Salt
  • *****
  • Posts: 468
  • Karma: +3/-1
Re: Raymarine ST60 Control Heads
« Reply #4 on: June 04 2015, 08:55 »
Can I ask why you're replacing them?
Logged
Pages: [1]   Go Up
« previous next »