« previous next »
Pages: [1]   Go Down

Author Topic: Genoa sheets  (Read 3367 times)

Moodymike

  • Old Salt
  • *****
  • Posts: 277
  • Karma: +0/-0
Genoa sheets
« on: May 28 2015, 17:15 »
On my B32 (2003) the starboard Genoa sheet has a habit of falling to the winch base if pulled in with no tension, this can result in a riding turn. I suspect it is caused by the line up of the starboard winch to the Carr roller.  Does anyone suffer from this and if so is there a way of avoiding it.
Logged

Konan the Bavarian

  • First Mate
  • ***
  • Posts: 76
  • Karma: +0/-0
  • Boat Model: 37 Cruiser
  • Boat Year: 2006
Re: Genoa sheets
« Reply #1 on: May 28 2015, 23:39 »
We are familiar with this on our B37, if you have more than 2x turns on the winch, whilst pulling on the sheets with no load.
We pull sheets on with only 2x turns on the winch, and once the slack has been taken out of the sheets, take another two turns before securing in the self tailer. Never seen another over-ride since.
Logged

Trapeze Artist

  • First Mate
  • ***
  • Posts: 94
  • Karma: +0/-0
    • Little Hotels
  • Boat Model: Bavaria 30 Cruiser
  • Boat Year: 2005
Re: Genoa sheets
« Reply #2 on: May 29 2015, 22:38 »
Also familiar on my B30. Not a big issue in practice, but that seems like an interesting solution, Konan.
Logged

battuta

  • First Mate
  • ***
  • Posts: 55
  • Karma: +0/-0
  • Boat Model: Bavaria Cruiser 31
  • Boat Year: 2009
Re: Genoa sheets
« Reply #3 on: May 31 2015, 11:10 »
Yup, occasionally get the same thing on our 2009 B31 when not under tension...

-Riyad
Logged
Pages: [1]   Go Up
« previous next »