Author Topic: Bavaria 390 Lagoon Stern Bumper strip  (Read 1776 times)

GarryF

  • Swab
  • Posts: 3
  • Karma: +0/-0
  • Boat Model: Bavaria Lagoon 390
  • Boat Year: 1992
Bavaria 390 Lagoon Stern Bumper strip
« on: July 11 2021, 08:16 »
I’m trying to source the white “bumper bar” fitted at the stern on my 1994 Bavaria 390 Lagoon II. It’s a white rubber strip, approximately 500cm x 50cm x 75cm, and I would appreciate any suggestions, or pointers, where I could get hold of a suitable replacement.

tiger79

  • Old Salt
  • *****
  • Posts: 953
  • Karma: +10/-4
  • 2014 Cruiser 37
  • Boat Model: Cruiser 37
  • Boat Year: 2014
Re: Bavaria 390 Lagoon Stern Bumper strip
« Reply #1 on: July 11 2021, 11:04 »
Any Bavaria dealer should be able to source it for you, or you can buy it from SVB.

https://www.svb24.com/en/bavaria-pvc-skirting-board.html

GarryF

  • Swab
  • Posts: 3
  • Karma: +0/-0
  • Boat Model: Bavaria Lagoon 390
  • Boat Year: 1992
Re: Bavaria 390 Lagoon Stern Bumper strip
« Reply #2 on: July 12 2021, 01:59 »
Thanks for the link, it’s not exactly the same, but it’s a good starting point 👍

Laysula

  • First Mate
  • ***
  • Posts: 72
  • Karma: +0/-0
  • Boat Model: 350 lagoon
  • Boat Year: 1994
Re: Bavaria 390 Lagoon Stern Bumper strip
« Reply #3 on: July 12 2021, 05:40 »
It's not white, but looks the part. 
https://gallery.flexiteek.co.uk/boat_list/77/

GarryF

  • Swab
  • Posts: 3
  • Karma: +0/-0
  • Boat Model: Bavaria Lagoon 390
  • Boat Year: 1992
Re: Bavaria 390 Lagoon Stern Bumper strip
« Reply #4 on: July 14 2021, 05:52 »
That is very similar, and would certainly do the job. I had my decking replaced with flexiteek in Gouvia last year, so I will check with them if they are able to make something similar for me - thanks for the post  👍👍