« previous next »
Pages: [1]   Go Down

Author Topic: Antifoule paint breakthrough ????  (Read 3449 times)

Odysseus

  • Old Salt
  • *****
  • Posts: 446
  • Karma: +2/-0
  • Bill and Linda
    • www.scanmar-odysseus.co.uk
  • Boat Model: Bavaria 38
  • Boat Year: 2006
Antifoule paint breakthrough ????
« on: April 21 2019, 15:37 »
Anyone used this yet?  Hempel's Silic One Fouling Release System.

Looking for any info FROM USERS..

Odysseus
Logged
Odysseus

tiger79

  • Old Salt
  • *****
  • Posts: 953
  • Karma: +10/-4
  • 2014 Cruiser 37
  • Boat Model: Cruiser 37
  • Boat Year: 2014
Re: Antifoule paint breakthrough ????
« Reply #1 on: April 21 2019, 16:12 »
It's primarily aimed at power boats, as it needs a decent speed through the water to clean the hull.  Extended sailing at around 7 knots would probably keep it clean too.  Otherwise, it needs pressure-washing or manual cleaning at regular intervals.
Logged

Yngmar

  • Administrator
  • *****
  • Posts: 1595
  • Karma: +22/-2
  • Boat Model: 40 Ocean
  • Boat Year: 2001
Re: Antifoule paint breakthrough ????
« Reply #2 on: April 21 2019, 20:09 »
Here's my own little experiment with the very similar Aquacote: http://www.ybw.com/forums/showthread.php?486177-Hempel-Silic-One-for-propellers-anyone-tried-it&p=6178756#post6178756

The very limited lifespan on the Silic One didn't entice me though, else I would've been tempted to give it a try on the prop and saildrive. Will stick with Velox plus for now, which we get a 2 year life out of with a bit of scrubbing in summer
Logged
(formerly) Sailing Songbird  ⛵️ Bavaria 40 Ocean (2001)

Clivert

  • Able Seaman
  • ****
  • Posts: 115
  • Karma: +2/-0
  • Boat Model: Bavaria 34
  • Boat Year: 2001
Re: Antifoule paint breakthrough ????
« Reply #3 on: April 24 2019, 10:41 »
Been using Tiger Extra for ages and is the best I've used, including on prop.
Boat reasonably good on haul out after nearly three years.
Logged
Pages: [1]   Go Up
« previous next »