« previous next »
Pages: [1]   Go Down

Author Topic: Gas Strut for Saloon lifting seat Bavaria 44  (Read 2449 times)

s/y Susanne

  • Second Mate
  • **
  • Posts: 42
  • Karma: +0/-0
  • Boat Model: Bavaria 44/3
  • Boat Year: 2002
Gas Strut for Saloon lifting seat Bavaria 44
« on: January 02 2018, 15:33 »
I want to fit a gas strut or pair of struts to lift the two-seater fixed chair immediately opposite the cooker in my B44.

Anyone know the weight of this seat? I did not have the wit to weigh the seat and  now I'm in Scotland and  B44 in Greece?

I'm guessing at about 6 kilos but anyone with a better guess or an owner with a spring balance?

Happy New Year

Stew
SY Susanne
Logged

mikeiso1192

  • Second Mate
  • **
  • Posts: 44
  • Karma: +0/-0
  • Boat Model: Bavaria 38
  • Boat Year: 2004
Re: Gas Strut for Saloon lifting seat Bavaria 44
« Reply #1 on: January 02 2018, 23:19 »
Hi Stew
I did this mod on my B38.
I didn't weigh the seat (just took a guess) and fitted a single gas strut from a Fiat Panda tailgate.
Worked out fine - just had to experiment a litte with the angle of operation.
Mike
Logged

Odysseus

  • Old Salt
  • *****
  • Posts: 446
  • Karma: +2/-0
  • Bill and Linda
    • www.scanmar-odysseus.co.uk
  • Boat Model: Bavaria 38
  • Boat Year: 2006
Re: Gas Strut for Saloon lifting seat Bavaria 44
« Reply #2 on: January 03 2018, 10:49 »
This is my fitting you will be able to see the angles you need to achieve, I used a golf Bonnet gas strut, however there are lots of companies on the web who show you how to achieve the lift which is about 2\ 2.5 kilos.

I also put struts on my fridge and chart table

Hope this helps

Odysseus
Bav 38
Logged
Odysseus
Pages: [1]   Go Up
« previous next »