Author Topic: Warped fridge lid  (Read 2758 times)

julieian996

  • Swab
  • Posts: 5
  • Karma: +0/-0
  • Boat Model: Bavaria 37 Cruiser
  • Boat Year: 2014
Warped fridge lid
« on: September 11 2016, 08:54 »
 :( Any one else suffer from this very annoying problem.?
We are on our 3rd lid, and this one warped as well, bowing considerably. We do use the boat all summer, so its on for months at a time, but surely this should not happen?

Any one any ideas or cures?

tiger79

  • Old Salt
  • *****
  • Posts: 903
  • Karma: +9/-4
  • 2014 Cruiser 37
  • Boat Model: Cruiser 37
  • Boat Year: 2014
Re: warped fridge lid
« Reply #1 on: September 11 2016, 08:59 »
Mine's warped very slightly, but not enough that I'm particularly concerned.

Ziffius

  • Old Salt
  • *****
  • Posts: 278
  • Karma: +0/-0
  • Boat Model: Bavaria 39
  • Boat Year: 2005
Re: warped fridge lid
« Reply #2 on: September 11 2016, 20:39 »
My fridge kid hasn't warped as far as I can tell but I do notice my two sink covers warp slightly during the season but seem to flatten in the winter.

willfinch36

  • First Mate
  • ***
  • Posts: 85
  • Karma: +0/-0
  • Boat Model: Bavaria 37
  • Boat Year: 2006
Re: warped fridge lid
« Reply #3 on: September 12 2016, 09:31 »
I do notice my two sink covers warp slightly during the season but seem to flatten in the winter.

Strange, mine warp slightly during winter, but fine come spring...

Neil

  • First Mate
  • ***
  • Posts: 74
  • Karma: +0/-0
  • Boat Model: Bavaria 39
  • Boat Year: 2006
Re: Warped fridge lid
« Reply #4 on: September 14 2016, 08:44 »
Mine is warped slightly. Only happened in the last 6 months. I will keep an eye on it, but it is ok at the minute.

robgs

  • Second Mate
  • **
  • Posts: 29
  • Karma: +0/-0
  • Boat Model: Vision 40
  • Boat Year: 2007
Re: Warped fridge lid
« Reply #5 on: September 20 2016, 18:35 »
The countertop fridge lid in my 2007 Vision 40 warped somewhat due to the temperature difference inside and out. I glued a half inch layer of foam insulation to the bottom side of the lid and we keep the top covered with a small mat. No warping.