Author Topic: Replacement washboard?  (Read 6558 times)

Nigel

  • R.I.P.
  • Old Salt
  • *****
  • Posts: 624
  • Karma: +0/-0
    • Dolcetto - My Boat
  • Boat Model: Bavaria 47
  • Boat Year: 2000
Replacement washboard?
« on: June 01 2012, 10:26 »
Can anyone give a recommendation for a company who can manufacture a Perspex/Plexiglass/PMMA/Acrylic washboard, using a paper template?
Nigel Mercier: Forum Administrator

njsail

  • First Mate
  • ***
  • Posts: 89
  • Karma: +0/-0
  • Boat Model: Bavaria 40 Ocean
  • Boat Year: 2001
Re: Replacement washboard?
« Reply #1 on: June 01 2012, 12:19 »
I would look in your local phone book under glass.  Many local glass shops will be able to cut acrylic and be able to edge it properly.   If not they should be able to provide a local shop who can.  I would try to avoid shipping cost (but that's me).  good luck

singlefish

  • Able Seaman
  • ****
  • Posts: 123
  • Karma: +0/-0
  • Boat Model: 38
  • Boat Year: 2003
Re: Replacement washboard?
« Reply #2 on: September 10 2012, 13:47 »
qd plastics , dumbarton,  http://www.qdplastics.co.uk/


Odysseus

  • Old Salt
  • *****
  • Posts: 446
  • Karma: +2/-0
  • Bill and Linda
    • www.scanmar-odysseus.co.uk
  • Boat Model: Bavaria 38
  • Boat Year: 2006
Re: Replacement washboard?
« Reply #3 on: September 10 2012, 15:03 »
Amari Plastics are all over the UK look them up on Google.

Odysseus
Odysseus

damsis44

  • Swab
  • Posts: 3
  • Karma: +0/-0
  • Boat Model: bavaria 44
  • Boat Year: 2002
Re: Replacement washboard?
« Reply #4 on: September 14 2012, 21:41 »
Boatcraft at Clyde Marina, Ardrossan cut a new one for our 44 from smoked plexi as the old one literally split in two. About £70 if memory serves me right. (Also did us a ply one whilst we were waiting for the perspex to come in) - excellent service.

Nigel

  • R.I.P.
  • Old Salt
  • *****
  • Posts: 624
  • Karma: +0/-0
    • Dolcetto - My Boat
  • Boat Model: Bavaria 47
  • Boat Year: 2000
Re: Replacement washboard?
« Reply #5 on: September 15 2012, 17:25 »
Thanks for all the replies, now sorted.
Nigel Mercier: Forum Administrator