Bavaria Yacht Info
Member Forums => Bavaria Yacht Help! => Topic started by: geoff on May 22 2020, 13:58
-
If anybody is on board an ocean 40 cc I would very much appreciate a photo of the front of the engine lower section . I want to know how close to the engine bed the oil filter is, and whether or not an oil pump with vertical filter would fit. cheers Geoff
-
This help?
There's plenty of room underneath to put a hand when unscrewing the filter. Not sure what you want to install there instead?
(https://yachtsnet.co.uk/archives/bavaria-40-ocean/p9297-engine.jpg)
-
Many thanks Yngmar just what I need . At the end of last season my md22 suffered from an oil leak from the area of the front crank/ oil pump area. As it was due anyway I replaced the belt , tensioner and guide pully the water pump was also starting to weep [kept it going for 5yrs with Kseal] . With that lot out of the way I removed the oil pump and replaced the crank oil seal. I am now plssed off that the oil still leaks! . The next job is to check the pressure relief to see if the plunger seal is failing. If that is not the problem there is probably a small fault in the oil pump casting. Maestro oil pumps are £20 but the filter housing is vertical so room is tight on the engine bed. Thanks Geoff