Bavaria Yacht Info
Member Forums => Bavaria Yacht Help! => Topic started by: Kerenza on September 21 2011, 14:25
-
Hi all
I have a Bavaria 35 holiday from 1997 in good condition. Recently the switch panel voltage and levels indicators have become highly inaccurate, I guess due to voltage regulation on the pcb?
Would anyone have a schematic for these circuits?
Thanks
-
Would anyone have a schematic for these circuits?
There should be a diagram in the Bavaria User Manual, but I've attached one that I've re-drawn from a B47.
-
Thanks very much - don't have the manual unfortunately. Something to start with, but all my displays are ancient digital ones so guess it's a dismantle and trace job!
BW
Martin
-
don't have the manual unfortunately...
One of the things that I hope will happen is that members will upload any hard-to-get manuals to the site, once I've sorted out a way to do it in an orderly fashion!
-
Somebody looking for a 2006-2010 model panel with full info?
This is a must to have in your boat!!!
Enjoy :kewl
-
Hi
Send an e-mail to the manufacturer CARLIRA in Germany with the Panel Number, I found them very helpful last year when I took down my Chart table panel to fit a new VHF and found all the shore power wires burnt & worn through where they plug into the back of the electrics panel, I explained the problem and that I needed 2 new plugs along with the pins that clip inside, and within 4 days 2 new plugs + Spare pins arrived along with an invoice for 10-Euro
http://www.calira.de/de/dt/frameset.php
Excellent Customer Service
Graham
Lastchance
B38 Exclusive on the Medway