Bavaria Yacht Info
Member Forums => Bavaria Yacht Help! => Topic started by: Alphadug on January 16 2019, 17:37
-
Don't know if this has been covered anywhere. We have a 2015 Vision 42 with the manually collapsible cockpit table. The table will not slide down, even when I sit on it. Has anyone had this problem and how did you fix it? If we manage to get it down it's a struggle to raise it again.
Thanks,
Doug
-
I have the same table on my V46. It gets stiffer as it gets salty and dirty. I lubricate the pistons periodically (twice a year maybe) with a very small amount of lubricant like CorrosionX . Spray onto a cloth or kitchen towel and wipe around the piston.
I still have to sit on it to get it down but I think that is more the pressure inside the pistons not friction. When I release the cam clips if it's down it springs back up easily.
I also use the same lube on the table sliders too.
Hope it helps
-
Reviving this thread as I have had same problem. Even worse for me is the aluminum table top frame is not very secure to the top stanchion pipe. Right now I put in a few countersink rivets but it's not very secure.
Has anyone had the same problem and what was your solution?
From what I can see, whatever fastener is used it must be countersunk to allow the top to seat properly to convert to lounger. I could slap a big bolt on but then it wouldn't seat.