Bavaria Yacht Info
Member Forums => Bavaria Yacht Help! => Topic started by: filban on May 12 2022, 19:05
-
I need to remove my chart plotter from the binnacle as I am fitting a cockpit table to the front of the binnacle and need access to fit the bolts which fix the table support brackets
the table is a KJHowells folding leaf
I have never done this before and ask if anyone has any tips for this operation
attached is a photo of the rear business side of the binnacle
thanks
-
Take the front bezel off the chartplotter. You'll then be able to access the screws holding it on the binnacle.
-
We fitted the same table to our B32. We accessed the binnacle through the large circular hatch under the throttle.
A few cables, etc to navigate but enabled us to reach the back(front?) of the binnacle where the table bolts will be located.
-
Thanks for your replies
I have tried to access the necessary area through the circular access hatch but it seemed very congested ( or maybe I have big hands!)
I will remove the plotter carefully after removing the bezel