Author Topic: B47 Volvo Penta MD22P-B Hose  (Read 3111 times)

Nigel

  • R.I.P.
  • Old Salt
  • *****
  • Posts: 624
  • Karma: +0/-0
    • Dolcetto - My Boat
  • Boat Model: Bavaria 47
  • Boat Year: 2000
B47 Volvo Penta MD22P-B Hose
« on: May 03 2015, 12:38 »
I have just reorganised my alternator belts, see http://www.bavariayacht.info/forum/index.php/topic,961.0.html

In doing so, I wanted to swivel a hose that goes to the calorifier as it appeared that it connected to another hose (from the fresh water pump) via a T-piece. However, after removing the Jubilee Clips, I discovered that although the hose has an insert, the joint is continuous, see pictures:


However, the diagram on Marine Parts Europe shows a hose in several sections: http://www.marinepartseurope.com/en/volvo-penta-explodedview-7746710-26-2900.aspx


It looks to me as if the hose has already been swivelled (in the direction I want to go) for the initial install of the alternator, I would like to swivel it just a bit more.

I'm a bit concerned about the state of the take-off on this hose, what do the experts think?
I assume I could get hoses from another source, without the marine upgrade? Any suggestions?
Nigel Mercier: Forum Administrator