Member Forums > Bavaria Yacht Help!

Throttle Lever Seal

(1/1)

AMG:
An alternative method to renew the throttle lever seal on a Bavaria 33 (2006) and other models, which does not require removal of throttle lever. Use neoprene roll, 8mm x 8mm, available from a well-known global website (£6.49 / 1.5 metres). Remove the old silicon first and clean with methylated spirit. Form a circle around the lever with the neoprene, and cut to approximate size. Check the final size of the circle and ‘mark’ and then make a final cut of the neoprene.

Note: it’s easier to join the neoprene at right angles with superglue. This will create a point in the neoprene circle, which you rotate to face downwards, out of sight.  Fix the neoprene circle in place with sealant or an adhesive of your choice (or both).   

Navigation

[0] Message Index