« previous next »
Pages: [1]   Go Down

Author Topic: Holding tank lids stuck: how to open?  (Read 2136 times)

Krumelur

  • Old Salt
  • *****
  • Posts: 310
  • Karma: +2/-3
  • Boat Model: Bavaria 40
  • Boat Year: 2010
Holding tank lids stuck: how to open?
« on: October 03 2023, 10:22 »
I would like to clean (flush) my holding tanks but I cannot get the lids to turn. I don't think anyone has ever used them to pump stuff out.
The tool to open them just bends. What would you suggest? Heat?
Logged

Odysseus

  • Old Salt
  • *****
  • Posts: 445
  • Karma: +2/-0
  • Bill and Linda
    • www.scanmar-odysseus.co.uk
  • Boat Model: Bavaria 38
  • Boat Year: 2006
Re: Holding tank lids stuck: how to open?
« Reply #1 on: October 03 2023, 12:55 »
Short length of wood with 2 screws strategical placed to fit, then lever it open.
Logged
Odysseus

tiger79

  • Old Salt
  • *****
  • Posts: 944
  • Karma: +10/-4
  • 2014 Cruiser 37
  • Boat Model: Cruiser 37
  • Boat Year: 2014
Re: Holding tank lids stuck: how to open?
« Reply #2 on: October 03 2023, 13:02 »
I had to destroy my tank access port to remove it.  SVB sell replacements.  I fitted the new one with lots of silicone grease so hopefully it'll unscrew next time.
Logged

sunshine

  • First Mate
  • ***
  • Posts: 98
  • Karma: +0/-0
  • Boat Model: Bavaria 30
  • Boat Year: 2006
Re: Holding tank lids stuck: how to open?
« Reply #3 on: October 19 2023, 08:54 »
Pair of pliers in the fully open position. Insert the handles into the two slots on the tank cover. Use a spanner (I used a shifter) on the pivot point of the pliers and turn. If your pliers have plastic handles, so much the better.
Logged

Ailatan

  • Able Seaman
  • ****
  • Posts: 181
  • Karma: +3/-0
  • Boat Model: Bavaria 44
  • Boat Year: 2003
Re: Holding tank lids stuck: how to open?
« Reply #4 on: October 19 2023, 21:33 »
I used this tool
Logged
Pages: [1]   Go Up
« previous next »