Author Topic: Autopilot for 42 2004 - Unidenterfied part  (Read 2193 times)

Taz

  • Cadet
  • *
  • Posts: 8
  • Karma: +0/-0
  • Boat Model: 42 crusier
  • Boat Year: 2004
Autopilot for 42 2004 - Unidenterfied part
« on: August 24 2023, 03:18 »
Going to put in an autopilot system with a Lewmar Mamba drive unit 1/4HP 12V, and a Raymarine ACU 200 kit and Axiom 9plus chartplotter.

Any information or pictures on the steering system would be great.

Dose anyone know what this is, there is a sensor just left hanging under the steering gearbox?

kavok

  • Able Seaman
  • ****
  • Posts: 189
  • Karma: +0/-8
  • Boat Model: 40 Cruiser
  • Boat Year: 2008
Re: Autopilot for 42 2004 - Unidenterfied part
« Reply #1 on: August 26 2023, 16:16 »
On my 40 I have similar componenti, but Evo 400.
Evo 200 has not enough power for Lewmar Mamba 1/4 hp that need  the computer at least 5 time more power that average motor consumption.
4 amp for Mamba need at least 20 amp computer.
Evo 200 15 amp
Evo 400 30 amp.

kavok

  • Able Seaman
  • ****
  • Posts: 189
  • Karma: +0/-8
  • Boat Model: 40 Cruiser
  • Boat Year: 2008
Re: Autopilot for 42 2004 - Unidenterfied part
« Reply #2 on: August 27 2023, 18:04 »
If you do not just have the Mamba motor, consider to buy a rotative Jefa motor, 

Viviane2000

  • Cadet
  • *
  • Posts: 18
  • Karma: +1/-1
  • Boat Model: Bavaria 42
  • Boat Year: 2000
Re: Autopilot for 42 2004 - Unidenterfied part
« Reply #3 on: August 27 2023, 20:37 »
It looks like the (steering?) chain in the first picture could use some grease

Taz

  • Cadet
  • *
  • Posts: 8
  • Karma: +0/-0
  • Boat Model: 42 crusier
  • Boat Year: 2004
Re: Autopilot for 42 2004 - Unidenterfied part
« Reply #4 on: August 31 2023, 09:59 »
I will be cleaning and greesing all the steering components and cheking aligment
It looks like the (steering?) chain in the first picture could use some grease