« previous next »
Pages: [1]   Go Down

Author Topic: 130S-D SAILDRIVE with Ambassador rope Cutter  (Read 2293 times)

bravado

  • Cadet
  • *
  • Posts: 8
  • Karma: +0/-0
  • Boat Model: Bavaria 32
  • Boat Year: 2003
130S-D SAILDRIVE with Ambassador rope Cutter
« on: July 10 2023, 19:09 »
Has anyone had trouble fitting this rope cutter and the prop cone locks the propeller?
Logged

symphony2

  • Old Salt
  • *****
  • Posts: 518
  • Karma: +11/-0
  • Boat Model: B33
  • Boat Year: 2015
Re: 130S-D SAILDRIVE with Ambassador rope Cutter
« Reply #1 on: July 10 2023, 22:27 »
Should not be a problem. Do you have the correct anode? normally no need to remove the propeller to change the anode. Is this a new installation and is it a standard Volvo fixed blade propeller?
Logged

bravado

  • Cadet
  • *
  • Posts: 8
  • Karma: +0/-0
  • Boat Model: Bavaria 32
  • Boat Year: 2003
Re: 130S-D SAILDRIVE with Ambassador rope Cutter
« Reply #2 on: July 11 2023, 17:44 »
Yes new install. It seems there is a bolt to change on the sail drive unit which is not in the instructions
Logged

marp

  • Cadet
  • *
  • Posts: 18
  • Karma: +0/-0
  • Boat Model: Bavaria 39 Cruiser
  • Boat Year: 2007
Re: 130S-D SAILDRIVE with Ambassador rope Cutter
« Reply #3 on: July 23 2023, 18:07 »
I have 130s on my B39 and to change anode no need to remove prop.
Logged
Pages: [1]   Go Up
« previous next »