« previous next »
Pages: [1]   Go Down

Author Topic: Main sheet and kicker rope diameter  (Read 1298 times)

catlotion

  • First Mate
  • ***
  • Posts: 65
  • Karma: +0/-0
  • Boat Model: Bavaria 30 Cruiser
  • Boat Year: 2006
Main sheet and kicker rope diameter
« on: July 01 2023, 18:35 »
I can't decide what size to go for on my Bavaria 30 cruiser mainsheet and kicker.

Braid on braid, 12mm and 10mm respectively or can I go down a size? 10mm/8mm?

Any recommendations please?
Logged

tiger79

  • Old Salt
  • *****
  • Posts: 932
  • Karma: +9/-4
  • 2014 Cruiser 37
  • Boat Model: Cruiser 37
  • Boat Year: 2014
Re: Main sheet and kicker rope diameter
« Reply #1 on: July 01 2023, 18:40 »
Bigger sheets are easier to handle.
Logged

Yngmar

  • Administrator
  • *****
  • Posts: 1577
  • Karma: +21/-2
  • Boat Model: 40 Ocean
  • Boat Year: 2001
Re: Main sheet and kicker rope diameter
« Reply #2 on: July 01 2023, 21:09 »
Maximum size is written on the blocks and rope clutches. Minimum size on the rope clutches only. You don't want to go too thin or it'll be like trying to tear off a twine with bare hands  ;D

Load wise, 10 or even 8mm are probably fine even with polyester braid on braid.
Logged
(formerly) Sailing Songbird  ⛵️ Bavaria 40 Ocean (2001)

symphony2

  • Old Salt
  • *****
  • Posts: 502
  • Karma: +10/-0
  • Boat Model: B33
  • Boat Year: 2015
Re: Main sheet and kicker rope diameter
« Reply #3 on: July 01 2023, 22:32 »
If it comes back to a clutch and a winch then 8mm will be fine. 10mm is perhaps better if you are hauling it in only by hand.
Logged

IslandAlchemy

  • Old Salt
  • *****
  • Posts: 473
  • Karma: +3/-1
Re: Main sheet and kicker rope diameter
« Reply #4 on: July 02 2023, 08:15 »
10mm is a nice compromise. 12mm is a bit big, and 8mm will hurt your hands.
Logged
Pages: [1]   Go Up
« previous next »