Ray Marine RAYMARINE AUTOPILOT EV-2

[Taz]

Intending to install a RAYMARINE AUTOPILOT EV-2.

Has anyone got any pictures of the auto pilot installation for a Bavaria 2004 42 ft? 

Had a look at under the arft stearing and was not what I expected. Twin wheels drive chains connect to a gear box and head off at right angles to the rudder stock.

There seems to be provision for a motor to go on back of the gear box and some strang cable and conectors... see pics

I at a lose to where to intall .... seem to hard for me... and thats not posible...

Ian

[Yngmar]

Yup, the motor goes on that splined shaft opposite the chain sprocket.

Like this: https://www.osculati.com/en/11681-69.320.02/autopilot-drive-constellation-12v

[Taz]

Thank you Yngmar for the information

It looks like I can get a drive unit in Australia.
https://www.bluebottlemarine.com/products/lewmar-autopilot-drive-unit-mamba-drive-unit-1-4-hp-12-volt.html

My understaning I will need a sensor to interface with the RayMarine Autopilot Evolution with p70s control head & ACU-200, EV1 Sensor Core, EV1 Cabling kit and add on a Axiom plotter.

 All up about $10,000 AUD.

Any more information accepted

Ian