Author Topic: Windvane  (Read 2763 times)

robbadgie

  • Cadet
  • *
  • Posts: 15
  • Karma: +0/-0
  • Boat Model: Cruiser 37
  • Boat Year: 2017
Windvane
« on: January 15 2023, 00:01 »
Hi, we have a Cruiser 37. I’m planning to add a Windvane steering of some kind, which has to be offset due to the swim platform. Anyone have recommendations or suggestion for what I should look at?

Thanks!

symphony2

  • Old Salt
  • *****
  • Posts: 518
  • Karma: +11/-0
  • Boat Model: B33
  • Boat Year: 2015
Re: Windvane
« Reply #1 on: January 15 2023, 10:47 »
Hydrovane. you will see photos of one fitted to Bavarias, both 37 and 33 here hydrovane.com/galleries/dropdown/

tiger79

  • Old Salt
  • *****
  • Posts: 953
  • Karma: +10/-4
  • 2014 Cruiser 37
  • Boat Model: Cruiser 37
  • Boat Year: 2014
Re: Windvane
« Reply #2 on: January 15 2023, 10:48 »
I think you'll need to add some serious reinforcement to the transom area to take the loads of a vane steering system.  The GRP there is fairly thin.

symphony2

  • Old Salt
  • *****
  • Posts: 518
  • Karma: +11/-0
  • Boat Model: B33
  • Boat Year: 2015
Re: Windvane
« Reply #3 on: January 15 2023, 16:40 »
It is not actually. I was surprised how thick it was when we bored holes to fit emergency steps on the port side where the Hydrovane is normally fitted. I have no doubt some reinforcing will be required but it is very accessible. No doubt Hydrovane will advise exactly what is required.

Jeffatoms

  • Able Seaman
  • ****
  • Posts: 112
  • Karma: +0/-0
  • Boat Model: Ocean 38
  • Boat Year: 1998
Re: Windvane
« Reply #4 on: January 15 2023, 17:15 »
For what it's worth, we too have considered the options and hands down, Hydrovane wins.  They have what I would consider to be a superior product and they are a wonderful company to speak with.

There is a video on YouTube by the sailing Millenial Falcon people where they walk through the product and the complete installation of Hydrovane.  Check it out.

tiger79

  • Old Salt
  • *****
  • Posts: 953
  • Karma: +10/-4
  • 2014 Cruiser 37
  • Boat Model: Cruiser 37
  • Boat Year: 2014
Re: Windvane
« Reply #5 on: January 15 2023, 17:26 »
It is not actually. I was surprised how thick it was when we bored holes to fit emergency steps on the port side where the Hydrovane is normally fitted.

I too drilled a big hole to fit emergency steps, and wasn't impressed by the thickness of the GRP.