Author Topic: length of Spinnaker Sheet  (Read 2127 times)

Michtsui

  • Cadet
  • *
  • Posts: 21
  • Karma: +0/-0
  • Boat Model: Bavaria C 42
  • Boat Year: 2005
length of Spinnaker Sheet
« on: September 27 2022, 06:54 »
Hi all,

My boat is a bavaria C42 with asymetric spinnaker set up (120 meter square area with fixed bowspirt).

The length of my current spinnaker sheet (each side) is 28 meters - my question is what is the typical length of the spinnaker sheets? any magic ratio? I felt the current length is quite long, when playing the ball, a lot of lazy left on board.

sy_Anniina

  • Old Salt
  • *****
  • Posts: 263
  • Karma: +6/-0
  • Boat Model: Bavaria 40
  • Boat Year: 2001
Re: length of Spinnaker Sheet
« Reply #1 on: September 27 2022, 07:03 »
I believe a typical rule-of-thumb is 2 x LOA for asym spi sheets, especially if you are gyping the kite outside, i.e. the tack goes outside of the kite, not between kite and forestay.

BR

Tommi
s/y Anniina

Captain Jan

  • Cadet
  • *
  • Posts: 20
  • Karma: +0/-0
  • Boat Model: Bavaria 38 Holiday
  • Boat Year: 1997
Re: length of Spinnaker Sheet
« Reply #2 on: September 29 2022, 20:55 »
I believe Tommi is about right, 2 x LOA  & would add that all our cruising gybes of an assymetric are made around the outside of the forestay- ie backing off the sheet allows the sail to free fly ahead of the boat before sheeting in on the other gybe.  Significant alterations of course assist.

Michtsui

  • Cadet
  • *
  • Posts: 21
  • Karma: +0/-0
  • Boat Model: Bavaria C 42
  • Boat Year: 2005
Re: length of Spinnaker Sheet
« Reply #3 on: October 04 2022, 10:10 »
Thanks for the sharing