« previous next »
Pages: [1]   Go Down

Author Topic: sea water pump impeller  (Read 1468 times)

tckearney

  • Able Seaman
  • ****
  • Posts: 190
  • Karma: +1/-0
  • Boat Model: B42
  • Boat Year: 2000
sea water pump impeller
« on: August 08 2022, 08:26 »
Good day,   I am looking for the part number or diameter of the sea water pump impeller most likely fitted to my B42.    It is year 2000 with the 55HP engine.  The boat is in Scotland and I'm moving it next Saturday to Cowes.  I'm sure I have a spare onboard but it may be a "used but good" spare.  I would like to buy a new spare before I head over to get the boat.  Once on the boat time is very limited before I have to leave so probably wont get chance to search the chandlers for one.  Any advice that will help me purchase one this week before I leave would be good.  Thanks
Logged

SYJetzt

  • Old Salt
  • *****
  • Posts: 320
  • Karma: +11/-0
  • Boat Model: Cruiser 46
  • Boat Year: 2005
Re: sea water pump impeller
« Reply #1 on: August 08 2022, 09:24 »
The part number of the original VP spare part kit (impeller, grease, o-ring,..) is 21951346.
VP D2 engines are pretty common, so nearly every chandlery should have a matching (aftermarket) part in stock, which is usually less expensive than the VP stuff.   
Logged

symphony2

  • Old Salt
  • *****
  • Posts: 518
  • Karma: +11/-0
  • Boat Model: B33
  • Boat Year: 2015
Re: sea water pump impeller
« Reply #2 on: August 08 2022, 09:51 »
Your engine is an MD22L Impeller kits here - but probably cheaper elsewhere such as part4engines.
keypart.com/volvo-penta/diesel-engine/md22l/19922002
Logged
Pages: [1]   Go Up
« previous next »