removing chart plotter to access binnacle Bav 32 2002

[filban]

I need to remove my chart plotter from the binnacle as I am fitting a cockpit table to the front of the binnacle and need access to fit the bolts which fix the table support brackets


the table is a KJHowells folding leaf

I have never done this before and ask if anyone has any tips for this operation


attached is a photo of the rear business side of the binnacle


thanks

[tiger79]

Take the front bezel off the chartplotter.  You'll then be able to access the screws holding it on the binnacle.

[Fenders]

We fitted the same table to our B32. We accessed the binnacle through the large circular hatch under the throttle.
A few cables, etc to navigate but enabled us to reach the back(front?) of the binnacle where the table bolts will be located.

[filban]

Thanks for your replies

I have tried to access the necessary area through the circular access hatch but it seemed very congested ( or maybe I have big hands!)

I will remove the plotter carefully after removing the bezel