« previous next »
Pages: [1]   Go Down

Author Topic: Add AIS to DC Panel  (Read 885 times)

Sailpirate

  • Cadet
  • *
  • Posts: 10
  • Karma: +0/-0
  • Boat Model: Bavaria 31 Ocean
  • Boat Year: 2000
Add AIS to DC Panel
« on: April 15 2022, 19:45 »
Hello all,
I have a 2000 Bav31 with. Calira Sealine 420 Panel
I am installing AIS and wondering where the best connection is for the 12v DC power supply. I presume there is the +connector block to connect to.
Photos, if anyone has these would bemuseful
Thanks :tbu
Logged
The pessimist complains about the wind.
The optimist expects it to change.
The realist adjusts the sails.

Yngmar

  • Administrator
  • *****
  • Posts: 1525
  • Karma: +18/-2
  • Boat Model: 40 Ocean
  • Boat Year: 2001
Re: Add AIS to DC Panel
« Reply #1 on: April 15 2022, 20:31 »
If you have a spare switch+breaker on your panel, use that. Otherwise it's not uncommon to have it share the one for the radio. There should be a negative bus bar for the negative wire. Add an inline fuse of appropriate size for the AIS if you share the radio switch+breaker.
Logged
Sailing Songbird  ⛵️ Bavaria 40 Ocean (2001)

Sailpirate

  • Cadet
  • *
  • Posts: 10
  • Karma: +0/-0
  • Boat Model: Bavaria 31 Ocean
  • Boat Year: 2000
Re: Add AIS to DC Panel
« Reply #2 on: April 16 2022, 06:25 »
Thanks will check that out when I am onboard
Logged
The pessimist complains about the wind.
The optimist expects it to change.
The realist adjusts the sails.
Pages: [1]   Go Up
« previous next »