« previous next »
Pages: [1]   Go Down

Author Topic: Seldon Gennaker Pole with ParaSailor?  (Read 2567 times)

true_kiwi

  • Swab
  • Posts: 3
  • Karma: +0/-0
  • Boat Model: Bavaria Vision 46
  • Boat Year: 2018
Seldon Gennaker Pole with ParaSailor?
« on: March 24 2022, 19:18 »
Hi All,
Hoping anyone out there has the same setup.
I have a Bavaria Vision 46 with the retractable carbon gennaker pole and am thinking of getting a Parasailor for it.
After much research I cannot see anywhere if the pole can take the vertical loadings without it with snapping off or ripping the mounting ring out of the deck.
As it is retractable, fitting a bob-stay or whisker stays to offset vertical forces is not practical.
Anyone out there with any experience with this.?
Lemme know and thanks!
Pete.
Logged

Lazy Pelican

  • Old Salt
  • *****
  • Posts: 239
  • Karma: +4/-0
  • Boat Model: Bavaria 39
  • Boat Year: 2006
Re: Seldon Gennaker Pole with ParaSailor?
« Reply #1 on: March 24 2022, 19:45 »
If your Seldon Pole fittings are fixed solely to the deck you’re likely to lift the deck at the deck/hull joint. Don’t ask how I know!
Logged

true_kiwi

  • Swab
  • Posts: 3
  • Karma: +0/-0
  • Boat Model: Bavaria Vision 46
  • Boat Year: 2018
Re: Seldon Gennaker Pole with ParaSailor?
« Reply #2 on: March 24 2022, 20:00 »
Yep. attached to the deck right here (see photo).
Sorry you had to learn the 'hard way'.
Is this pole mounting like yours?
Logged

Lazy Pelican

  • Old Salt
  • *****
  • Posts: 239
  • Karma: +4/-0
  • Boat Model: Bavaria 39
  • Boat Year: 2006
Re: Seldon Gennaker Pole with ParaSailor?
« Reply #3 on: March 24 2022, 22:00 »
Ours isn’t Seldon. We have a twin bow roller which we’ve modified to take a small sprit to fly a cruising chute.
Following strong winds we noticed the deck had lifted about 1cm. Solved by modifying the tang for the forestay which bolts to the hull.
Logged

awk1001

  • Swab
  • Posts: 2
  • Karma: +0/-0
  • Boat Model: Bavaria 37
  • Boat Year: 2006
Re: Seldon Gennaker Pole with ParaSailor?
« Reply #4 on: March 28 2022, 16:09 »
Hi there - Have you got a photo/description of the mod?  Looking to try something similar on my 2006 B37.  Thank you!
Logged

Mirror45184

  • Old Salt
  • *****
  • Posts: 203
  • Karma: +1/-0
  • Boat Model: Cruiser 40
  • Boat Year: 2009
Re: Seldon Gennaker Pole with ParaSailor?
« Reply #5 on: March 31 2022, 14:48 »
Pete/True_Kiwi,
Fitted a bobstay and preventer from back of the sprit to the forestay to carry compression reaction of the bobstay. This preventer was set up to allow the sprit to be retracted when needed. The owner wanted to fly a code 0 and resulting luff forces would have destroyed the sprit.
Cheers
Logged
Mark Hutton
SV SYnergy
B40 Cruiser 2009

Thomas

  • Cadet
  • *
  • Posts: 8
  • Karma: +0/-0
  • Boat Model: Vision 46
  • Boat Year: 2012
Re: Seldon Gennaker Pole with ParaSailor?
« Reply #6 on: June 12 2022, 00:34 »
Hi
I own a 2012 V46
I was thinking of getting a bowsprit pole a few years ago.
I have the moulded in pads on the deck but when I enquired with Clipper Marine I was told that system is no longer supported.
The preferred system now uses a sprit anchored using the forestay tangs.

I did the arc last year on a boat with a seldon bow sprit and it failed dramatically

I bit the bullet and a fitted proper spinnaker pole and gear - so worth the cost especially if you're thinking of a parasail
Logged
Pages: [1]   Go Up
« previous next »