hi, i have a question about renewing batteries,at the moment from memory, the house batts are 2 x lead acid 140ah and are just about shot at, the engine start is also lead acid but is ok, the charger is an sbc quick 501 charger that can be set to gel or fla, the alterator i assume is standard vp,running through the origanal diode splitter thingy in (blue box) on the engine compartment back board.
would it be advisable/possible to do a strait swap of the house batterys to agm of the same sise,and switch the charger to agm, or would it be better to re fit fla leisure instead.
the thing i cant decide is would agms be damaged by the alternator voltage when the engine is running, or if swiching the charger to agm, then the engine start would not be getting enough to top it up.
as ive spent a lot of this years budget getting the standing rigging renwed i could do without having to replace charging systems as well as the batteries.
the boats intended use is for days out of marina, weekends away and possibly a weeks trip at some point in the year, i also have a 1.6kw portable genny for if we were to use 240v for any reason.
has anyone done this ? and what was the outcome?
thanks
phil