Hello: new Bavaria owner and new forum member; I'll try to search past posts before I post, so as not to abuse the privilege! In my pre-purchase survey, it's noted that the AC outlets on the boat are testing as reversed hot and neutral. The surveyor says, "they're lax about this in Europe, but you have to correct that in North America." So I started at the dock outlet: all good. At the shore power plug on the boat I got in the back and measured voltage across the hot/black and the ground, so good there. When I opened the AC panel in the boat I could see where the AC was coming into a connector with screw terminals. I swapped the hot/black with the neutral/white, and figured I was good. Powering up the AC again I left everything off but the panel outlet--it now tested Hot/Ground reversed! I couldn't understand this as I hadn't touched the green wire. So I reversed it back to the way it was before I repowered anything. What am I not understanding here?
Also, I need to replace the round AC outlet at the sink (weird place for a plug) as it's got a little bit of charring (otherwise works fine but I'd like to replace it.) I cannot find an online source for the Bavara round 110v single outlet--found a couple for EUR 220v. I'd rather not cut the cabinet to fit a duplex outlet.
Thanks for any help!
