Author Topic: Ceiling Lights Black Retaining plastic ring  (Read 1999 times)

MagicalArmchair

  • Old Salt
  • *****
  • Posts: 297
  • Karma: +4/-0
  • Boat Model: Bavaria
  • Boat Year: 2002
Ceiling Lights Black Retaining plastic ring
« on: August 14 2020, 10:50 »
One of Mirages lights is missing the black plastic retaining rim, that holds the glass in - I have replacement glass just no way of holding it in! Is there anywhere you can buy spares without buying the whole unit?

https://www.svb24.com/en/led-surface-mounted-interior-light.html

This wouldn't be an issue, however, my 2 year old has figured out how to pull out my flash new LED bulbs  ::) ;D.

catlotion

  • First Mate
  • ***
  • Posts: 65
  • Karma: +0/-0
  • Boat Model: Bavaria 30 Cruiser
  • Boat Year: 2006
Re: Ceiling Lights Black Retaining plastic ring
« Reply #1 on: August 18 2020, 11:14 »
I know these aren't the same as the Bavaria plastic ones but might be worth a try?

https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2057872.m570.l1313&_nkw=downlight+retaining+ring&_sacat=0

I've got one or two dodgy plastic ones too - sure they were going to break when I recently changed to LED.

catlotion

  • First Mate
  • ***
  • Posts: 65
  • Karma: +0/-0
  • Boat Model: Bavaria 30 Cruiser
  • Boat Year: 2006
Re: Ceiling Lights Black Retaining plastic ring
« Reply #2 on: August 18 2020, 11:16 »
on a related note, even after dropping to lower brightness LED bulbs I still found they glare a bit too much.  Fitting small circles of this diffuser film on top of the glass helped quite a bit:

https://www.ebay.co.uk/itm/Light-diffuser-5-sheets-of-A5-PET-film/254657190894?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649