Author Topic: sail drive on B42  (Read 2148 times)

tckearney

  • Able Seaman
  • ****
  • Posts: 190
  • Karma: +1/-0
  • Boat Model: B42
  • Boat Year: 2000
sail drive on B42
« on: May 24 2020, 11:55 »
Quick question Im not at the boat and have no documentation with me.  Can anybody advise if my sail drive is 120 or 130 on a B42 2000 model.  I need to order some bits in advance of a visit.  Its the 55hp engine.  Thanks

Symphony

  • Old Salt
  • *****
  • Posts: 1106
  • Karma: +0/-0
  • Boat Model: Bavaria 33
  • Boat Year: 2015
Re: sail drive on B42
« Reply #1 on: May 24 2020, 12:17 »
If it is original it will be a 120. 130 did not come in until 2006. Simple identification is that the 120 has a one piece anode and the 130 a 2 piece. Note that there are different variations on the 120 but are mainly in the reduction box and internals, but service parts like anodes, drain plug, lower seals, gaskets are all the same.

Luna Azzurra

  • Swab
  • Posts: 6
  • Karma: +0/-0
  • Boat Model: Bavaria 42 Cruiser
  • Boat Year: 2005
Re: sail drive on B42
« Reply #2 on: September 12 2020, 09:20 »
I have a 2005 Bavaria 42 Cruiser and a 130S-A sail drive was installed and it is the original.
That means that the 130 did come before 2006

sy_Anniina

  • Old Salt
  • *****
  • Posts: 263
  • Karma: +6/-0
  • Boat Model: Bavaria 40
  • Boat Year: 2001
Re: sail drive on B42
« Reply #3 on: September 12 2020, 21:17 »
B40 2001 has an original 120S (with MD22L-B, should be the same 55hp you have ) so most likely Yours will be that one as well.

BR

Tommi
S/Y Anniina

Jeffatoms

  • Able Seaman
  • ****
  • Posts: 112
  • Karma: +0/-0
  • Boat Model: Ocean 38
  • Boat Year: 1998
Re: sail drive on B42
« Reply #4 on: September 14 2020, 04:22 »
I've purchased a couple of these over the past couple years.  The 120S has a 2" oil/lubricant fill cap on top center with a dipstick behind it whereas the 130 has a small 3/4 inch combo dipstick and fill only.