Author Topic: Water damage head door  (Read 2810 times)

ejessen

  • Second Mate
  • **
  • Posts: 27
  • Karma: +0/-0
  • 2001 Bavaria 40AC
  • Boat Model: Bavaria 40AC
  • Boat Year: 2001
Water damage head door
« on: April 19 2020, 22:15 »
The bottom 4 inches on my head door is showing signs of water damage. We take our showers in there which I am sure is the root problem.  See attached image.

I was thinking of adding a stainless steel kick plate on the both sides of the door with screws and epoxy. Might not look 100%, but would defer a door replacement for a few more year.

Anyone done something similar? Or is there a better way?

-- Erik   

Yngmar

  • Administrator
  • *****
  • Posts: 1595
  • Karma: +22/-2
  • Boat Model: 40 Ocean
  • Boat Year: 2001
Re: Water damage head door
« Reply #1 on: April 19 2020, 22:31 »
A PO fixed this on our boat by adding a wooden profile with a drip lip to the bottom of the door. He even chose a matching sapele wood, but sadly left it untreated! I've since cleaned it up, rounded it over a bit and varnished it. Looks like it was meant to be there now.

Ultimately we protect the door with a shower curtain though (and with showering on the transom in summer).

Can snap a picture of the drip profile if needed.
(formerly) Sailing Songbird  ⛵️ Bavaria 40 Ocean (2001)

Odysseus

  • Old Salt
  • *****
  • Posts: 446
  • Karma: +2/-0
  • Bill and Linda
    • www.scanmar-odysseus.co.uk
  • Boat Model: Bavaria 38
  • Boat Year: 2006
Re: Water damage head door
« Reply #2 on: April 21 2020, 10:07 »
The doors are vulnerable so I fitted a shower curtain that runs along that bulkhead, door always dry now, also fitted a proper shower station.
Odysseus
Bav 38
Odysseus