« previous next »
Pages: [1]   Go Down

Author Topic: Swim step ladder - repair or replace options  (Read 2100 times)

Cassiopeia

  • Swab
  • Posts: 17
  • Karma: +0/-0
  • Boat Model: Bavaria 46 Exclusive
  • Boat Year: 1997
Swim step ladder - repair or replace options
« on: July 28 2019, 20:17 »
We lost the bottom 1/2 of our swim ladder. The bolts were loose while it was hanging in current overnight and the bolts vibrated out and it dropped off. 😟

We’re considering finding a stainless person to make a new section. But I’m also wondering if a telescoping model might work as a replacement.

Anyone replaced their ladder?

1997 46E

Inner piece width OD 27 cm
1st section width OD 32 cm

Logged
Doug and Mary
S/V Cassiopeia  1997 Bavaria 46E
Sailing the Puget Sound now, planning for Mexico and maybe the South Pacific in a few years

philipa

  • Swab
  • Posts: 5
  • Karma: +0/-0
  • Boat Model: Bavaria 38
  • Boat Year: 2004
Re: Swim step ladder - repair or replace options
« Reply #1 on: August 14 2019, 10:37 »
Yes, I think (part of) a telescoping ladder should work fine.

I recently replaced a telescoping ladder on a 2004 B38. I was in Turkey, and somewhat skeptical that I would find the right ladder. In the end, I found several that would suit in chandlers at reasonable prices (~£75). The trick was to re-use the arms attached to the boat, and swap the ladder section at the hinge - just undoing and redoing the bolts. That way the arms were the correct length for the overhang (which is large on the B38).
Logged
Pages: [1]   Go Up
« previous next »