« previous next »
Pages: [1]   Go Down

Author Topic: Resealing keel joint  (Read 1818 times)

elias

  • Old Salt
  • *****
  • Posts: 338
  • Karma: +2/-0
  • Boat Model: Bavaria 44
  • Boat Year: 2003
Resealing keel joint
« on: October 04 2020, 12:52 »
Hi guys,
We have just took about boat out for wintering , I noticed that the metal around the joint is a little disintegrated and the sikaflex rubber that we apply needs resealing . Should I put some epoxy metal pudding before ? Or just put the new sika ? 
Logged

Yngmar

  • Administrator
  • *****
  • Posts: 1595
  • Karma: +22/-2
  • Boat Model: 40 Ocean
  • Boat Year: 2001
Re: Resealing keel joint
« Reply #1 on: October 04 2020, 15:04 »
The hull flexes a bit while the keel does not, which leads to these crumbling cracks. Once thoroughly dried out, just apply some adhesive sealant there. When cured, you can sand it and paint it (use sealant that is sand-/paintable).
Logged
(formerly) Sailing Songbird  ⛵️ Bavaria 40 Ocean (2001)

elias

  • Old Salt
  • *****
  • Posts: 338
  • Karma: +2/-0
  • Boat Model: Bavaria 44
  • Boat Year: 2003
Re: Resealing keel joint
« Reply #2 on: October 04 2020, 22:23 »
Thanks a lot for one more time !
Logged
Pages: [1]   Go Up
« previous next »