G'day All,
I read Jolo's post and others' comments regarding the wiring issue; however, I'm not sure at this point where my malfunction originates.
I'm on the hard and I had the external power connected to ships electrical system to perform improvements below. A day or so into the project, the amber light illuminated - on Panel 16 it is in the centre of the panel above a green battery light.
The Bavaria Owners Manual schematics for electrical are illegible.
I've two 200ah house batteries. I isolated the stbd and port batteries. Each battery shows 13.20v using a Fluke. Every time I connect the primary house battery (stbd), the amber light illuminates. Both GelTech batteries are cool to touch. Taking a jumper wire from the + terminal of the port battery to the primary battery +, the amber light illuminates. It appears the caution light illuminates irrespective of the power source.
Does anyone have a readable wiring diagram for the Panel 16 they'd care to share? Has anyone had a similar problem and how did you manage the rectification?
Any suggestions will be appreciated.