Author Topic: Drying out /scrubbing posts with "tandem" keel  (Read 4320 times)

willfinch36

  • First Mate
  • ***
  • Posts: 85
  • Karma: +0/-0
  • Boat Model: Bavaria 37
  • Boat Year: 2006
Drying out /scrubbing posts with "tandem" keel
« on: September 08 2014, 11:01 »
My previous bav had a normal fin keel, however the new one has a tandem keel, was thinking of putting it up against the scrubbing posts to give the hull a pressure wash & change saildrive anode.

Are there any issues doing this with a tandem keel? Has anyone got an experience or tips?

Thanks,

Will

willfinch36

  • First Mate
  • ***
  • Posts: 85
  • Karma: +0/-0
  • Boat Model: Bavaria 37
  • Boat Year: 2006
Re: Drying out /scrubbing posts with "tandem" keel
« Reply #1 on: September 22 2014, 09:25 »
In case anyone else looks this up, the answer is no real issues, put the stand just in front of the rudder to ensure the boat didn't put any weight on the rudder, was about 2 inches between the ground and the bottom of the rudder.

Ziffius

  • Old Salt
  • *****
  • Posts: 278
  • Karma: +0/-0
  • Boat Model: Bavaria 39
  • Boat Year: 2005
Re: Drying out /scrubbing posts with "tandem" keel
« Reply #2 on: September 22 2014, 13:51 »
Looks like Pinmill?

willfinch36

  • First Mate
  • ***
  • Posts: 85
  • Karma: +0/-0
  • Boat Model: Bavaria 37
  • Boat Year: 2006
Re: Drying out /scrubbing posts with "tandem" keel
« Reply #3 on: September 22 2014, 15:22 »
Royal Harwich Yacht Club, just up the river from Pin Mill indeed :)

Jackho

  • Second Mate
  • **
  • Posts: 46
  • Karma: +0/-0
  • Boat Model: B37
  • Boat Year: 2006
Re: Drying out /scrubbing posts with "tandem" keel
« Reply #4 on: October 21 2014, 22:08 »
 :) :) good info. mine has a tandem keel and now I know I can dry out. Many thanks

willfinch36

  • First Mate
  • ***
  • Posts: 85
  • Karma: +0/-0
  • Boat Model: Bavaria 37
  • Boat Year: 2006
Re: Drying out /scrubbing posts with "tandem" keel
« Reply #5 on: November 20 2017, 15:49 »
Thought I'd update this and add a new picture.

Turns out if you empty the rear water tank you don't require a stand and she sits just perfect.