« previous next »
Pages: [1]   Go Down

Author Topic: Anchor Windlass Switch  (Read 3513 times)

Lazy Pelican

  • Old Salt
  • *****
  • Posts: 239
  • Karma: +4/-0
  • Boat Model: Bavaria 39
  • Boat Year: 2006
Anchor Windlass Switch
« on: July 08 2016, 17:50 »
I'm replacing my Lewmar Windlass with a Lofrans. The Lewmar has 2 wire input from the control box (located above the chart table), whereas the Lofrans has 3 wires, so the easiest option is to locate the new Control Box on the Forepeak/ Anchor Locker bulkhead. I have an existing wired hand controller which I'll reuse.
My question relates to the Anchor Switch on the boat Control Panel- does it switch the windlass power or the Hand Controller?
If it switches Windlass Power I can simply cut the wires from the Hand Controller and connect them direct to the Control Box. Otherwise I have to extend the wires from the existing CB above the chart table.

John
Logged

Nigel

  • R.I.P.
  • Old Salt
  • *****
  • Posts: 624
  • Karma: +0/-0
    • Dolcetto - My Boat
  • Boat Model: Bavaria 47
  • Boat Year: 2000
Re: Anchor Windlass Switch
« Reply #1 on: July 08 2016, 19:16 »
The switch on the panel supplies the control box relay. 
Logged
Nigel Mercier: Forum Administrator

Lazy Pelican

  • Old Salt
  • *****
  • Posts: 239
  • Karma: +4/-0
  • Boat Model: Bavaria 39
  • Boat Year: 2006
Re: Anchor Windlass Switch
« Reply #2 on: July 08 2016, 20:44 »
There are 7 connections to the Control Box. 4 x Windlass Power +\- in out, & 3 x Hand Controller. Which of these does the Control Panel switch operate?

John
Logged
Pages: [1]   Go Up
« previous next »