« previous next »
Pages: [1]   Go Down

Author Topic: Fitting cable glands to sugar-scoop transom B47  (Read 4419 times)

Nigel

  • R.I.P.
  • Old Salt
  • *****
  • Posts: 624
  • Karma: +0/-0
    • Dolcetto - My Boat
  • Boat Model: Bavaria 47
  • Boat Year: 2000
Fitting cable glands to sugar-scoop transom B47
« on: September 17 2014, 09:18 »
I'm fitting a pair of cable glands onto my B47 sugar-scoop transom, level with these but on the port side:


Any idea how thick the GRP is in this area?
Logged
Nigel Mercier: Forum Administrator

IslandAlchemy

  • Old Salt
  • *****
  • Posts: 480
  • Karma: +4/-1
Re: Fitting cable glands to sugar-scoop transom B47
« Reply #1 on: September 17 2014, 16:31 »
Not very.  2-3mm?
Logged

Salty

  • Old Salt
  • *****
  • Posts: 1216
  • Karma: +3/-1
  • Boat Model: Bavaria 36
  • Boat Year: 2002
Re: Fitting cable glands to sugar-scoop transom B47
« Reply #2 on: November 12 2014, 23:12 »
Hi Nigel,
I fitted a different type of cable gland in a similar position on the port side of the sugar scoop on my B36, and while I didn't measure the thickness of the GRP, I'd say it was getting on for about 10mm as the self tapping screw ends provided with the gland did not reach all the way through. As yours is a bigger boat I think the thickness of the GRP would be commensurately thicker.
Logged
Pages: [1]   Go Up
« previous next »