« previous next »
Pages: [1]   Go Down

Author Topic: Removal of Binnacle Instrument Panel Bavaria 32  (Read 3477 times)

stone687

  • Cadet
  • *
  • Posts: 15
  • Karma: +0/-0
  • Boat Model: Bavaria 32
  • Boat Year: 2002
Removal of Binnacle Instrument Panel Bavaria 32
« on: April 01 2016, 08:19 »
The grey instrument backing panel on the binnacle on my B32 seems to held in by 5 screws; however having removed them there is no movement on the panel.  I don't want to put a lot of force on the panel (since it seems to be brittle) until I'm convinced I'm not missing something.

Can anyone help with information?

Many thanks,

David
Logged

Symphony

  • Old Salt
  • *****
  • Posts: 1106
  • Karma: +0/-0
  • Boat Model: Bavaria 33
  • Boat Year: 2015
Re: REMOVAL OF BINNACLE INSTRUMENT PANEL
« Reply #1 on: April 01 2016, 09:05 »
Think you will find it is stuck down with a foam rubber gasket that sticks quite well when it has been on for some time. Carefully lever it off.
Logged

MarkTheBike

  • Old Salt
  • *****
  • Posts: 445
  • Karma: +1/-0
  • 34/2001 2cab
  • Boat Model: Bavaria 34
  • Boat Year: 2001
Re: REMOVAL OF BINNACLE INSTRUMENT PANEL
« Reply #2 on: April 01 2016, 11:57 »
Absolutely. Gave me the colley-wobbles first time but with a firm, gentle pressure, it'll slowly unstick itself.
Logged
ATB

Mark

stone687

  • Cadet
  • *
  • Posts: 15
  • Karma: +0/-0
  • Boat Model: Bavaria 32
  • Boat Year: 2002
Re: Removal of Binnacle Instrument Panel Bavaria 32
« Reply #3 on: April 01 2016, 16:26 »
 :)  Many thanks folks for the swift replies.   I will go at it gently with with my 10 llb lump hammer!
Logged

MarkTheBike

  • Old Salt
  • *****
  • Posts: 445
  • Karma: +1/-0
  • 34/2001 2cab
  • Boat Model: Bavaria 34
  • Boat Year: 2001
Re: Removal of Binnacle Instrument Panel Bavaria 32
« Reply #4 on: April 02 2016, 21:10 »
Oh yes, the panel isn't brittle. I think it's GRP but it's pretty tough whatever it is.
Logged
ATB

Mark
Pages: [1]   Go Up
« previous next »