Author Topic: Helmsmans seat, Bavaria 38  (Read 5080 times)

trapperjohn

  • Swab
  • Posts: 2
  • Karma: +0/-0
  • Boat Model: bavaria 38
  • Boat Year: 2004
Helmsmans seat, Bavaria 38
« on: February 18 2012, 16:23 »
I have a Bavaria 38 2004 model, and while sailing last year down the coast of Spain and Portugal my helmsman seat fell overboard and duly sank.  I'm wondering if anyone out there knows where I can find a replacement, I am living in the Republic of Ireland and to date have been unable to find a replacement.

I would appreciate any help on this matter.

Trapper John

Odysseus

  • Old Salt
  • *****
  • Posts: 439
  • Karma: +1/-0
  • Bill and Linda
    • www.scanmar-odysseus.co.uk
  • Boat Model: Bavaria 38
  • Boat Year: 2006
Re: Helmsmans seat, Bavaria 38
« Reply #1 on: February 18 2012, 17:46 »
You can still get them through Bavaria or agents, they are in the order of £400.

I know it's too late but one of my modifications was to put a line on mine.

Regards
Odysseus
Odysseus

tony from dorset

  • Second Mate
  • **
  • Posts: 46
  • Karma: +0/-0
  • Boat Model: bavaria 36 cruiser
  • Boat Year: 2004
Re: Helmsmans seat, Bavaria 38
« Reply #2 on: February 19 2012, 17:58 »
Try clipper marine   uk agents Hamble southampton  strangely enough all the opening  fibreglass hatches  anchor lockers  and seats and fibreglass add ons are made in poland and not germany,  just go through dealer directory i am sure any of those would help

KAOS

  • Second Mate
  • **
  • Posts: 43
  • Karma: +0/-0
  • Boat Model: BAVARIA 38
  • Boat Year: 1999
Re: Helmsmans seat, Bavaria 38
« Reply #3 on: February 19 2012, 20:10 »
Have a good old google

Nigel

  • R.I.P.
  • Old Salt
  • *****
  • Posts: 624
  • Karma: +0/-0
    • Dolcetto - My Boat
  • Boat Model: Bavaria 47
  • Boat Year: 2000
Re: Helmsmans seat, Bavaria 38
« Reply #4 on: February 19 2012, 22:38 »
I know it's too late but one of my modifications was to put a line on mine.

The centre seat on my B47 is hinged, and it got smashed up badly. Bavaria no longer make it, so I had to strip is out to repair it. Inside it was filled with foam, which was completely waterlogged due to a previous crack. Bottom line: make sure your hole with the line through it is well sealed.
Nigel Mercier: Forum Administrator

Hahser

  • Swab
  • Posts: 5
  • Karma: +0/-0
  • Boat Model: Bavaria 42
  • Boat Year: 2005
Re: Helmsmans seat, Bavaria 38
« Reply #5 on: August 07 2015, 15:21 »
I, too, need to replace a missing helmsman's seat for a Bav 42. It is common, apparently, for them to get lost overboard.

I did trace one but £400 ? They have got to be joking.

I'll make up a wooden one somehow.