« previous next »
Pages: [1]   Go Down

Author Topic: AC Pump Relay Box/Pannel on '17 Vision 42  (Read 1911 times)

Nate Feldick

  • Swab
  • Posts: 1
  • Karma: +0/-0
  • Boat Model: Bavaria VISION 42
  • Boat Year: 2017
AC Pump Relay Box/Pannel on '17 Vision 42
« on: June 10 2019, 03:01 »
Hello All!  My AC pump runs continuously on my 2017 Vision 42.  I know its probably an issue with the pump relay switch but after looking at all the usual places, I can't find it.  Anyone know where the Pump Relay box/panel may be located?  Thanks!
Logged

JJackson18b

  • Swab
  • Posts: 24
  • Karma: +0/-0
  • Boat Model: Vision 42
  • Boat Year: 2017
Re: AC Pump Relay Box/Pannel on '17 Vision 42
« Reply #1 on: July 30 2019, 03:18 »
Curious if you found the answer to this, mine does the same...
Logged
Jon J.  SV Ruck-Up

paulemeier1

  • Able Seaman
  • ****
  • Posts: 125
  • Karma: +3/-0
  • Boat Model: Bavaria 37.2 Cruiser
  • Boat Year: 2006
Re: AC Pump Relay Box/Pannel on '17 Vision 42
« Reply #2 on: July 30 2019, 10:43 »
pay attention not to get the hole water from the fresh water tank into your boat.
because it is also passible that there is a leak at a non visible area in your ship so better have a look.
Or the fresh water tank is empty? then the pump also run continuos
Logged

Philipio

  • Swab
  • Posts: 3
  • Karma: +0/-0
  • Boat Model: 33 Cruiser
  • Boat Year: 2006
Re: AC Pump Relay Box/Pannel on '17 Vision 42
« Reply #3 on: July 31 2019, 11:44 »
I have a Bav. 33 Cruiser (2006) and the fuel gauge stopped working a couple of months ago. For some reason  or other the sender unit was a 3 wire system. On going through the circuitry i found out that the feed for the sender was actually coming via the gauge in the binnacle.Easy to see the spade connections  without dismantling everything. Replaced the sender with a new 2 wire system and everything works great now.
Logged
Pages: [1]   Go Up
« previous next »